 |
The
orth ritish EGO® rain lub |
 |
Baseboard Modules - References & Resources
- Baseboard dimensions
- PDFs for module design
- Clearance gauge
- Cutting plan for 8x4 sheet
Baseboard
Dimensions
diagram
- The height to the top flat surface of the baseboard is 900mm.
- The width of the baseboard is 638mm +/- 1mm
- The length of the baseboard is 1277mm +/- 1mm
- Holes for bolts to join modules together are 10mm in diameter.
- The centres for the holes are 40mm below the top flat surface of the
base board.
- The centres for the holes are spaced 160mm either side of the centre
line of the board, in each direction. On the long side, further holes are
spaced at 320mm intervals
- The bolts used to join modules are M8, with large diameter washers to
allow for the oversized holes
- The depth of the sub-frame is not defined. But obviously, it must be
deep enough to accomodate the fixing holes. Our current recommendation is 3x1
for the outer box, with smaller timbers for internal bracing.
PDFs
Module with trackbeds
Module without
trackbeds
Clearance Gauge
Clearance diagram
Cutting Plan
How to cut an 8x4
sheet
Modules
Home
Disclaimer:The
North British LEGO® Train Club has no connection
with The LEGO® Company.
The NBLTC is a private
club which is not endorsed by, or affiliated to The LEGO® Company in any way.